How to program your New Skyview rx600

[Gugi47]

This is what you need to do to program your New Skyview rx600

1) you will need to Connect your unit using a Null Rs232 Cable
2) You will need to place your unit on "Standby" mode
3) Open the New Loader and select the latest file and press "Start"
4) When the download is done you will see "End" on the front panel.
5) Connect your unit to your satellite and Press menu and channel down 5 times and select factory defult "ALL" and then "Yes"
5) NOW scan your satellites in { LNB Freq must be at 11250 on both ECHo7 and Echo 6.8}
6) Press menu and go into System Settings and press "OSD" Change the channel No. from "Normal" To SID. Then Exit.
7) If needed to activate your Keys Press F1 000.
8) After it auto rolls you can start watching TV.