How to setup 118.7/119

[dptw27]

C&P

How to setup 118.7/119

You will need to make sure you have Anik F3 118.7°W in your satellite list. If not you will need to added it and at least one of the TP like 11715. You need special Circular 10750 LNB. Anik F3 will need a larger dish to get decent signal (30" +)

In The satellite List for Anik F3 118.7°W you will need the following settings:

• LNB Type: Standard
• LNB Freq.: 10750 MHz
set your switch setting to the special LNB aimed at 118.7/119

Scan the channels with Network On
You will get the Anik F3 channels (130 channels average)

Then go to EchoStar 7 119°W in your satellite list, use the same switch setting as 118.7°.above.

• LNB Type: Standard
• LNB Freq.: 10750 MHz

Scan the channels with Network On (260 channels average)


You are all set, getting the 2 satellites by only one single dish and LNB.