DN switch/lnbf type
There are lot of misinfo floating arround, so I take some time to do a summary of DN lnbf/switch.
LNBF
1. Legacy:
a. single: called single legacy, one output.
b. dual: called dual legacy, 2 outputs.
c. twin: big fat lnbf, 2 outputs, has 2 SW21 switch built-in.
d. quad: big fat lnbf, 4 outputs, has 4 SW 21 switch built-in.
2: DishPro
a. single: called single DishPro, one ouput.
b. dual: called dual DishPro, 2 outputs.
c. twin: big fat lnbf, 2 outputs, has 2 independent Diseqc switch built-in
d. quad: big fat lnbf, 4 outputs, has 4 independent Diseqc switch built-in
Switch
1. Diseqc: 2 versions: 1.0 and 2.0. People having problem with 2.0 version
a. 2 ways: 2 inputs, one output. Switch up to 2 lnbfs.
b. 4 ways: 4 inputs, one output. Switch up to 4 lnbfs.
2. 22khz switch: 2 inputs, one output. Switch up to 2 lnbfs.
3. 0/12v switch: 2 inputs, one output. Switch up to 2 lnbfs. (Note: 0/12v switch needs to be installed close to the receiver, therefore 2 cables has be run into your house)
4. There is no such thing as Diseqc 1.2 or 1.3 switch. The 1.2 and 1.3 (aka USALS) are for motorizing Diseqc h-h mount.
5. DP34. 3 inputs, 4 outputs. Can be used to combine a 2nd (61W or 148W)dish with DP twin or quad, so receiver will get signal from 3 sats.
Switch does not work well
1. SW21
2. Diseqc 2.0 version (either 2 ways or 4 ways).
Dish 500
1. with 2 separate legacy single or dual lnbfs.
2. with legacy twin or quads lnbf, no good.
3. with DishPro twin or quads lnbf, good. Need to use modified transponder list.
Setup:
1. Dish 500 with legacy single/dual lnbfs: use with any working switch stated above to switch between lnbfs. 2nd or 3rd dish can be added using Diseqc 4 ways.
2. Dish 500 with legacy twin/quads lnbf: replace the lnbf with single/dual lnbfs or DishPro twin/quads.
3. Dish 500 with DishPro twin/quads lnbf: good, controlled by Diseqc command using modified transponder list. 2nd dish can be added using DP34 switch.
Hope this post covers some of the misunderstanding about the dish, lnbf, switch types.
Blacksnake
__________________
__________________
Anything posted or found on this site is strictly for information purposes only.
Please don't PM me with questions that can be answered in the forums People please try the search button it could be your best friend! Viewsat Ultra & Xtreme
Pansat 3500SD & 250SM
|