How To Scan 9200HD for HD Channels

[hiller65]

Step 1: Press "menu", then "installation", then "satellite setup", then "edit tp/sat", then choose which satellite your going to edit, then "edit tp"
Step 2: Manually delete all your transponders on each satellite, one at a time
Step 3: Manually input each transponder for "SD" & "HD", when finished you will have 64 transponders. Both Dish and Bev use the same transponder frequencies and polarity. You can use the list provided below or go to

www.lyngsat.com

Active Transponder List for legacy set up

12224V 12239H
12253V 12268H
12282V 12297H
12311V 12326H
12341V 12355H
12370V 12384H
12399V 12414H
12428V 12443H
12457V 12472H
12486V 12501H
12516V 12530H
12545V 12559H
12574V 12588H
12603V 12618H
12632V 12647H
12661V 12676H

For Dish Pro set up you will have to convert all your horizontal transponders to vertical.

Example of what you input for "SD" transponders

Down Frequency: 12443
Symbol Rate: 20000
Polarity: Horizontal
Tuner Type: DVB-S
Modulation: QPSK
Pilot: Off
FEC: 5/6

Example of what you input for "HD" transponders

Down Frequency: 12443
Symbol Rate: 21500
Polarity: Horizontal
Tuner Type: DVB-S2
Modulation: 8PSK
Pilot: On
FEC: 2/3

When you finished all your Tp's, make sure you save all your work in the "Cha Data" folder on your USB memory stick.

Step 4: Scan each satellite and enjoy your HD.