Two ways you can load the bin onto your Pansat 3500S

[Gugi47]

1. D/L the latest bin and unzip it into a folder.
2. Copy it to your SD card.
3. Pop the SD card into your Pansat and go to menu and click on SD Memory. Locate the bin and click ok on remote then select yes then hit ok on remote again let d/l complete before doing anything. (Rule of thumb says wait til receiver reboots before doing anything.)



OR you can do it this way

1. Hook up the Null Modem cable to your receiver and p.c.
2. Open up Blacklist loader (looks like a blue lightning bolt)
3. Load the bin in the laoder by selecting browse (make sure you select the unzipped file)
4. Turn the receiver on via the on/off switch on the back of the unit.
5. As soon as you turn it on within 1 second hit the download button on the loader. (Again wait til the unit restarts completely before doing anything else.)


You loader will say download complete but it IS NOT done until the unit restarts by itself. Then and only then your flash is complete. Hope this helps.