Ariza Xtreme step by step setup

Ariza XTREME Step-by-Step Setup

Download/Save xtreme_uploader.zip
Download/Save the latest bin
Extract All with WinZIP (or similar)
Run setup.exe
Complete the installation
__________________________________________________ ________________________
Now that the Loader and latest bin is installed on your PC. Proceed below

Go to "Start>Program Files>Upgrade>upgrade"
Make sure settings are: MODE - DownLoad; TYPE - Prog, Data; Serial Port - COM1 or COM2 (Depends on your setup), and that you have a NULL MODEM SERIAL Cable connected to STB & PC.
STB - OFF (Power switch at the back of the unit)
Click Browse, (make sure to change to *.sgn instead of *.bin in the Browse window) find and select the file you want to upload.
Click Open
Click Start
Power on the STB (Power switch at the back of the unit)
Let it upload
Let it reboot
Wait until it passes INIT stage
Disconnect from PC
Connect to TV
Connect the Satellite Signal
Power on the unit.
Wait until it passes INIT stage.
Setup your dish settings